Choose a bonded seal 1 2 by matching the elastomer temperature range, metal washer, connection range, and centering style to the joint. Our Bonded Seals (Dowty Seals) are designed for sealing bolt holes where the assembly needs a bonded elastomer and metal ring.
A bonded seal 1 2 combines a trapezoidal elastomer element with a metal washer. The elastomer helps prevent fluid from leaking through the bolt hole, while the metal ring limits compression and extrusion of the pliable sealing element. This construction is suited to joints where high pressure calls for greater sealing capacity than a copper washer provides.
Our Bonded Seals (Dowty Seals) suit assemblies that need an elastomer sealing element bonded to the inside of a metal washer. We supply them for reliable sealing at high and low pressure, with high and low temperature capability.
Select the sealing material after checking the highest and lowest temperature at the seal location. The range must cover the service temperature, and the elastomer must suit the fluid in the assembly.
| Elastomer | Temperature range |
|---|---|
| Nitrile | -30 °C to +100 °C |
| HNBR | -20 °C to +150 °C |
| Viton | -20 °C to +200°C |
| EPDM | - 50 °℃ to +150°C |
| Silicone | -60°C to +250°C |
We supply Nitrile, HNBR, Viton, EPDM, and Silicone options. Nitrile fits a service temperature within its listed range, while HNBR, Viton, EPDM, and Silicone cover other temperature requirements shown above. Check fluid compatibility before finalizing the elastomer.
The metal ring supports the joint by preventing over-compression of the rubber element and extrusion under load. It also helps reduce bolt torque without losing tightening loads.
We supply metal rings in Mild Steel, Stainless Steel, Brass, and Aluminium. Select the ring material with the joint environment, mating surfaces, and fastener arrangement in mind. The metal ring and elastomer must suit the same assembly.
Our Bonded Seals (Dowty Seals) are available in Metric, Inch, BSP, German Metric, and French Metric ranges. Match the range to the connection designation and sealing seat.
Standard and Self-Centering styles cover different fitting conditions. Use the standard style when the bolt, recess, or mating parts already control the seal position. Choose Self-Centering when the seal needs to locate around the fastener during fitting.
This check points to Bonded Seals (Dowty Seals) when the assembly needs a metal-ring and bonded-elastomer sealing washer. The selection limit is fit: the connection range, elastomer, metal ring, and centering style must match the joint.
What to weigh
Your shortlist
Send the connection designation, elastomer, metal ring material, operating temperature range, and preferred style with your bonded seal 1 2 request. We can align the requested configuration with the assembly requirements.
The company
JULU YJM HWMF SEAL CO., LTD was established in 1991, mainly engaged in the export business of rubber seals. It is a moderm production enterprise integrating research and production. It covers an area of 80,000 square meters. It has two large manufacturing bases , one comprehensive warehouse, office and living failities. We have been focusing on rubber seals for more than 30 years.…
About Us ↗Visit company website ↗This is the First article
News Nov.17,2026
News Nov.15,2026
News Nov.02,2026
News Oct.30,2026
News Jul.01,2026
News Jun.29,2026
News Jun.27,2026
Products categories