Welcome to our online store!
Nov . 23, 2026 00:45 Back to list

How to Choose a Bonded Seal 1 2 for Your Connection



Choose a bonded seal 1 2 by matching the elastomer temperature range, metal washer, connection range, and centering style to the joint. Our Bonded Seals (Dowty Seals) are designed for sealing bolt holes where the assembly needs a bonded elastomer and metal ring.

How to Choose a Bonded Seal 1 2 for Your Connection
Illustration for reference; see the product page for actual photos and specifications.
1

Confirm the sealing construction

A bonded seal 1 2 combines a trapezoidal elastomer element with a metal washer. The elastomer helps prevent fluid from leaking through the bolt hole, while the metal ring limits compression and extrusion of the pliable sealing element. This construction is suited to joints where high pressure calls for greater sealing capacity than a copper washer provides.

Our Bonded Seals (Dowty Seals) suit assemblies that need an elastomer sealing element bonded to the inside of a metal washer. We supply them for reliable sealing at high and low pressure, with high and low temperature capability.

2

Match the elastomer to the temperature range

Select the sealing material after checking the highest and lowest temperature at the seal location. The range must cover the service temperature, and the elastomer must suit the fluid in the assembly.

ElastomerTemperature range
Nitrile-30 °C to +100 °C
HNBR-20 °C to +150 °C
Viton-20 °C to +200°C
EPDM- 50 °℃ to +150°C
Silicone-60°C to +250°C

We supply Nitrile, HNBR, Viton, EPDM, and Silicone options. Nitrile fits a service temperature within its listed range, while HNBR, Viton, EPDM, and Silicone cover other temperature requirements shown above. Check fluid compatibility before finalizing the elastomer.

3

Select the metal washer

The metal ring supports the joint by preventing over-compression of the rubber element and extrusion under load. It also helps reduce bolt torque without losing tightening loads.

We supply metal rings in Mild Steel, Stainless Steel, Brass, and Aluminium. Select the ring material with the joint environment, mating surfaces, and fastener arrangement in mind. The metal ring and elastomer must suit the same assembly.

4

Choose the connection range and centering style

Our Bonded Seals (Dowty Seals) are available in Metric, Inch, BSP, German Metric, and French Metric ranges. Match the range to the connection designation and sealing seat.

Standard and Self-Centering styles cover different fitting conditions. Use the standard style when the bolt, recess, or mating parts already control the seal position. Choose Self-Centering when the seal needs to locate around the fastener during fitting.

5

Use a short purchase check

  • Connection: identify the connection designation and sealing seat.
  • Temperature: select an elastomer range covering the service temperature.
  • Metal ring: choose Mild Steel, Stainless Steel, Brass, or Aluminium.
  • Style: specify standard or Self-Centering.
  • Range: identify Metric, Inch, BSP, German Metric, or French Metric sizing.

This check points to Bonded Seals (Dowty Seals) when the assembly needs a metal-ring and bonded-elastomer sealing washer. The selection limit is fit: the connection range, elastomer, metal ring, and centering style must match the joint.

What to weigh

Connection designation and sealing seat
Elastomer temperature range and fluid compatibility
Metal ring material
Standard or Self-Centering style
Metric, Inch, BSP, German Metric, or French Metric range

Your shortlist

Bonded Seals (Dowty Seals)bolt-hole sealing joints requiring a bonded elastomer and metal washer

Prepare the order details

Send the connection designation, elastomer, metal ring material, operating temperature range, and preferred style with your bonded seal 1 2 request. We can align the requested configuration with the assembly requirements.

The company

JULU YJM HWMF SEAL CO.,LTD.

JULU YJM HWMF SEAL CO., LTD was established in 1991, mainly engaged in the export business of rubber seals. It is a moderm production enterprise integrating research and production. It covers an area of 80,000 square meters. It has two large manufacturing bases , one comprehensive warehouse, office and living failities. We have been focusing on rubber seals for more than 30 years.…

About Us ↗Visit company website ↗

Pervious:

This is the First article



Next:

Products categories

  • Brass cutlass marine bearing

    Brass cutlass marine bearing

  • Genuine OEM Engine Oil Filter Housing Cover O-Ring For VW/Audi 06E115446

    Genuine OEM Engine Oil Filter Housing Cover O-Ring For VW/Audi 06E115446

  • Oil Filter Stand Gasket,Oil filter cover seal

    Oil Filter Stand Gasket,Oil filter cover seal

  • Oil Cooler Gasket, Oil Cooler to Oil Filter Housing 11427525335

    Oil Cooler Gasket, Oil Cooler to Oil Filter Housing 11427525335

  • 11427508970 BMW - OIL FILTER HOUSING GASKETS

    11427508970 BMW - OIL FILTER HOUSING GASKETS

  • SEAL, OIL Genuine Toyota (9031170011)

    SEAL, OIL Genuine Toyota (9031170011)

  • Transfer Case Output Shaft Seal Part 9031223001

    Transfer Case Output Shaft Seal Part 9031223001

  • SEAL, OIL Genuine Toyota (9031672001)

    SEAL, OIL Genuine Toyota (9031672001)

  • Engine Crankshaft Oil Seal No.9031138096

    Engine Crankshaft Oil Seal No.9031138096

  • Toyota Transfer Case Output Shaft Seal Front 9031136006

    Toyota Transfer Case Output Shaft Seal Front 9031136006

  • Seal, type v oil 9031287001 TOYOTA

    Seal, type v oil 9031287001 TOYOTA

  • Oil pump seal 9031143010

    Oil pump seal 9031143010

  • Genuine Toyota Oil SEAL 90311-54006

    Genuine Toyota Oil SEAL 90311-54006

  • Toyota SEAL TYPE T OIL 90311-48031

    Toyota SEAL TYPE T OIL 90311-48031

  • Type T Oil Seal, Front Drive Shaft, Left  9031150064

    Type T Oil Seal, Front Drive Shaft, Left 9031150064

  • Seal, type d oil 9031634001 TOYOTA

    Seal, type d oil 9031634001 TOYOTA

en_USEnglish

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.